# Debugging **URL:** https://forums.synfig.org/c/development/debugging/26.md?page=1 [Latest](https://forums.synfig.org/latest.md) · [Categories](https://forums.synfig.org/categories.md) · [Tags](https://forums.synfig.org/tags.md) **Page:** 2 --- ## [Synfig doesn't open large files issue](https://forums.synfig.org/t/synfig-doesnt-open-large-files-issue/12300)
**Author:** [@veermetri05](https://forums.synfig.org/u/veermetri05)\ **Replies:** 2\ **Last updated:** [June 18, 2021, 1:07pm UTC](https://forums.synfig.org/t/synfig-doesnt-open-large-files-issue/12300 "2021-06-18T13:07:00Z")
I just exported a sif file from Inkscape, the file is huge (19 MB). As I try to open it in Synfig it doesn’t open it and gives an error I don’t know, but it seems the problem is due to a huge file. I tried to open t… --- ## [Converting to Dot Product dosn't work for Angle or Real value!](https://forums.synfig.org/t/converting-to-dot-product-dosnt-work-for-angle-or-real-value/12187)
**Author:** [@veermetri05](https://forums.synfig.org/u/veermetri05)\ **Replies:** 2\ **Last updated:** [May 25, 2021, 7:08pm UTC](https://forums.synfig.org/t/converting-to-dot-product-dosnt-work-for-angle-or-real-value/12187 "2021-05-25T19:08:08Z")
As from the wiki the dot product should either work for angle or real value. But isn’t working for any. I think this issue is with Synfig 1.4.1(1.4.0 also). Also it doesn’t give bad connection error just shows what is be… --- ## [\[SOLVED\] Lst file from Papagayo crashes synfig](https://forums.synfig.org/t/solved-lst-file-from-papagayo-crashes-synfig/11540)
**Author:** [@lgolden](https://forums.synfig.org/u/lgolden)\ **Replies:** 7\ **Last updated:** [May 9, 2021, 6:48pm UTC](https://forums.synfig.org/t/solved-lst-file-from-papagayo-crashes-synfig/11540 "2021-05-09T18:48:24Z")
lipsync\_lst.zip (55,8,KB) Please, can someone test my lip sync file from papagayo? It´s aways crashing Synfig (all versions!) at specific frames… Thank you! --- ## [synfig hates me](https://forums.synfig.org/t/synfig-hates-me/90)
**Author:** [@floodbud](https://forums.synfig.org/u/floodbud)\ **Replies:** 3\ **Last updated:** [May 2, 2021, 7:18am UTC](https://forums.synfig.org/t/synfig-hates-me/90 "2021-05-02T07:18:24Z")
Have you experienced this problem? Yes (once) Yes (more than once) 0 voters I am using Synfig Studio on a Windows XP machine. My first impression of it was very good. However, a first impression was all I g… --- ## [Ease in/out-linear interpolation implemented incorrectly](https://forums.synfig.org/t/ease-in-out-linear-interpolation-implemented-incorrectly/11980)
**Author:** [@Bobo\_the\_King](https://forums.synfig.org/u/Bobo_the_King)\ **Replies:** 17\ **Last updated:** [April 20, 2021, 1:12am UTC](https://forums.synfig.org/t/ease-in-out-linear-interpolation-implemented-incorrectly/11980 "2021-04-20T01:12:20Z")
I’ve been trying to untangle the mathematics behind various interpolations and I’ve come across a rather serious issue. It seems that the linear interpolation is implemented incorrectly, at least with the ease in/out in… --- ## [strange sound issues](https://forums.synfig.org/t/strange-sound-issues/3757)
**Author:** [@Leris](https://forums.synfig.org/u/Leris)\ **Replies:** 5\ **Last updated:** [March 19, 2016, 12:22am UTC](https://forums.synfig.org/t/strange-sound-issues/3757 "2016-03-19T00:22:22Z")
Hey guys, I am new to synfig and like it very much already! I am doing the video tutorial, and when I try add sound file to the animation, it will do a strange loop, and when I try and add a bit delay, it will get faste… --- ## [Synfig couldn't save a project and now the project is not opening](https://forums.synfig.org/t/synfig-couldnt-save-a-project-and-now-the-project-is-not-opening/11835)
**Author:** [@NihaalMoktan07](https://forums.synfig.org/u/NihaalMoktan07)\ **Replies:** 13\ **Last updated:** [February 25, 2021, 5:36pm UTC](https://forums.synfig.org/t/synfig-couldnt-save-a-project-and-now-the-project-is-not-opening/11835 "2021-02-25T17:36:32Z")
I just couldn’t save this project because it was saying something like could not save in the E:/(location) and now when I opened it it’s saying Unable to load E:/(location) E:(Location): :65535:error:Unknown Exception t… --- ## [Skeleton deformation, parts not visible](https://forums.synfig.org/t/skeleton-deformation-parts-not-visible/3267)
**Author:** [@rylleman](https://forums.synfig.org/u/rylleman)\ **Replies:** 19\ **Last updated:** [January 28, 2021, 9:57pm UTC](https://forums.synfig.org/t/skeleton-deformation-parts-not-visible/3267 "2021-01-28T21:57:35Z")
Using the Skeleton deformation the image parts disappears when the deform is visible. Deform layer boundary is covering all images. Bone Width covers images. Skeleton is Pose reset when visibly turned on. Everything sho… --- ## [\[Not a Bug\] Can't move origin box relative to layer with Ctrl pressed in version 1.3.16](https://forums.synfig.org/t/not-a-bug-cant-move-origin-box-relative-to-layer-with-ctrl-pressed-in-version-1-3-16/11356)
**Author:** [@synfigme](https://forums.synfig.org/u/synfigme)\ **Replies:** 2\ **Last updated:** [January 6, 2021, 10:13pm UTC](https://forums.synfig.org/t/not-a-bug-cant-move-origin-box-relative-to-layer-with-ctrl-pressed-in-version-1-3-16/11356 "2021-01-06T22:13:50Z")
When I try to move the origin box position over the layer, while I hold the left mouse button down over the green dot, with the cntrl button pressed, the box moves the position of the layer instead of moving over the lay… --- ## [Where to find autosave files?](https://forums.synfig.org/t/where-to-find-autosave-files/11414)
**Author:** [@samuel\_sarao](https://forums.synfig.org/u/samuel_sarao)\ **Replies:** 1\ **Last updated:** [December 8, 2020, 4:37am UTC](https://forums.synfig.org/t/where-to-find-autosave-files/11414 "2020-12-08T04:37:29Z")
Where do I find the autosave files on my windows 10 laptop? I am using synfig studio v. 1.2.2. Thank you. --- ## [Under linux ubuntu exporting the video with ffmpeg doesn't works](https://forums.synfig.org/t/under-linux-ubuntu-exporting-the-video-with-ffmpeg-doesnt-works/11332)
**Author:** [@nicobzz](https://forums.synfig.org/u/nicobzz)\ **Replies:** 1\ **Last updated:** [December 7, 2020, 4:06pm UTC](https://forums.synfig.org/t/under-linux-ubuntu-exporting-the-video-with-ffmpeg-doesnt-works/11332 "2020-12-07T16:06:16Z")
Hello, I have this problem. When I start exporting my animation into a video in ffmpeg format it doesn’t work: The compress steps works but absolutely no files are created in my folder. I tried to export it using the c… --- ## [Synfig crashes and cant pull up last saved version](https://forums.synfig.org/t/synfig-crashes-and-cant-pull-up-last-saved-version/11347)
**Author:** [@tobythemouse](https://forums.synfig.org/u/tobythemouse)\ **Replies:** 0\ **Last updated:** [September 4, 2020, 3:57am UTC](https://forums.synfig.org/t/synfig-crashes-and-cant-pull-up-last-saved-version/11347 "2020-09-04T03:57:58Z")
So i’m new. I made an animation and saved my progress. While trying to render, Synfig crashes and I seem to only be able to open a version of the file from yesterday. Any ideas about where the missing work went? than… --- ## [Spline Vertex converter is very slow to parse](https://forums.synfig.org/t/spline-vertex-converter-is-very-slow-to-parse/11337)
**Author:** [@Svarov](https://forums.synfig.org/u/Svarov)\ **Replies:** 0\ **Last updated:** [August 30, 2020, 6:18am UTC](https://forums.synfig.org/t/spline-vertex-converter-is-very-slow-to-parse/11337 "2020-08-30T06:18:31Z")
Hi developers! I am working on my first full character and I ran into issue where my project takes significant time to load (15 minutes). And the problematic part is the “Spline Vertex (blinecalcvertex in SIF structure)… --- ## [Why is the keyframe marker size in v 1.3.15 is way too big in my computer](https://forums.synfig.org/t/why-is-the-keyframe-marker-size-in-v-1-3-15-is-way-too-big-in-my-computer/11246)
**Author:** [@guskarisma](https://forums.synfig.org/u/guskarisma)\ **Replies:** 12\ **Last updated:** [August 6, 2020, 8:29pm UTC](https://forums.synfig.org/t/why-is-the-keyframe-marker-size-in-v-1-3-15-is-way-too-big-in-my-computer/11246 "2020-08-06T20:29:46Z")
Hi, i’m running synfig on Bodhi Linux 5.1.0 with Enlightenment. With version 1.3.14 the UI looks fine. But trying the latest version 1.3.15, the keyframe marker size is too big. What should i do to make it smaller? --- ## [Artifact with Tweening](https://forums.synfig.org/t/artifact-with-tweening/11099)
**Author:** [@scanlonjd](https://forums.synfig.org/u/scanlonjd)\ **Replies:** 2\ **Last updated:** [June 16, 2020, 12:53am UTC](https://forums.synfig.org/t/artifact-with-tweening/11099 "2020-06-16T00:53:22Z")
Hi: A bizarre artifact is appearing when tweeting a rectangle–one corner of the rectangle extends (or bubbles) out during the tween, but is not visible at the beginning or end of the animation. It does not appear to be e… --- ## [Synfig 1.3.12 crashes frequently](https://forums.synfig.org/t/synfig-1-3-12-crashes-frequently/10647)
**Author:** [@synfigme](https://forums.synfig.org/u/synfigme)\ **Replies:** 42\ **Last updated:** [May 30, 2020, 4:32pm UTC](https://forums.synfig.org/t/synfig-1-3-12-crashes-frequently/10647 "2020-05-30T16:32:23Z")
I’ve been trying out Synfig 1.3.12 for a few weeks. I find that it crashes a lot more frequently than the stable 1.2.2. One thing that I did like was that the Switch Groups were a lot easier to use than 1.2.2 . It has al… --- ## [Frequent Crash to Desktop 1.3.14](https://forums.synfig.org/t/frequent-crash-to-desktop-1-3-14/11016)
**Author:** [@rcklln](https://forums.synfig.org/u/rcklln)\ **Replies:** 7\ **Last updated:** [May 22, 2020, 1:18pm UTC](https://forums.synfig.org/t/frequent-crash-to-desktop-1-3-14/11016 "2020-05-22T13:18:17Z")
Hi, I experience frequent crashes to desktop with Synfig 1.3.14. It is random except I can say that using the mouse wheel to scroll in the parameter and layer panels cause it to happen more frequently. I started using th… --- ## [Synfig 1.3.14 crashes](https://forums.synfig.org/t/synfig-1-3-14-crashes/10991)
**Author:** [@TheDarkTiger](https://forums.synfig.org/u/TheDarkTiger)\ **Replies:** 4\ **Last updated:** [May 21, 2020, 4:20pm UTC](https://forums.synfig.org/t/synfig-1-3-14-crashes/10991 "2020-05-21T16:20:44Z")
I open this thread to centralize the crash of the version 1.3.14 If you manage to make it crashes, please specify : The version of Synfig (32bits / 64bits) The OS you are using Describe what you were doing when it cra… --- ## [Rendering ffmpeg Bug](https://forums.synfig.org/t/rendering-ffmpeg-bug/4118)
**Author:** [@Gimli\_Bimli](https://forums.synfig.org/u/Gimli_Bimli)\ **Replies:** 8\ **Last updated:** [April 26, 2020, 12:04am UTC](https://forums.synfig.org/t/rendering-ffmpeg-bug/4118 "2020-04-26T00:04:52Z")
Version I use: SynfigStudio 1.2.0 64bit Win. HeyHey, I’m new here and havn’t found anything to that Problem yet. When I try to render my animation as ffmpeg, it says: After closing that window there is a new one: A… --- ## [Help, autosave does not work](https://forums.synfig.org/t/help-autosave-does-not-work/10410)
**Author:** [@Jhonca](https://forums.synfig.org/u/Jhonca)\ **Replies:** 0\ **Last updated:** [December 1, 2019, 1:09pm UTC](https://forums.synfig.org/t/help-autosave-does-not-work/10410 "2019-12-01T13:09:03Z")
Hi, how are you, I’m new using synfig, after a rejection of not being able to make animations, now that I understand how it works, I’m delighted. My problem is with autosave, ¿does anyone know how to repair it to work p… --- ## [Colors not showing up (in 1.2.2, solved since)](https://forums.synfig.org/t/colors-not-showing-up-in-1-2-2-solved-since/10256)
**Author:** [@Kashaan](https://forums.synfig.org/u/Kashaan)\ **Replies:** 2\ **Last updated:** [October 17, 2019, 3:51pm UTC](https://forums.synfig.org/t/colors-not-showing-up-in-1-2-2-solved-since/10256 "2019-10-17T15:51:29Z")
Hello I am using synfig studio 1.2.2 x32 and I have also tryed this with synfig studio 1.2.2 x64 version for windows. The problem I am getting is the colors are not showing up whether in the stroke and fill option or t… --- ## [Menu bar disappears when interface maximized](https://forums.synfig.org/t/menu-bar-disappears-when-interface-maximized/9778)
**Author:** [@diezus](https://forums.synfig.org/u/diezus)\ **Replies:** 2\ **Last updated:** [June 9, 2019, 10:53pm UTC](https://forums.synfig.org/t/menu-bar-disappears-when-interface-maximized/9778 "2019-06-09T22:53:11Z")
I note the following issue when I maximize the interface window. The menu bar with minimize, maximize and close buttons disappears. This happened when I used the alt + Tab method to alternate between Synfig and VLC. Le… --- ## [Can't animate](https://forums.synfig.org/t/cant-animate/1466)
**Author:** [@tushantin](https://forums.synfig.org/u/tushantin)\ **Replies:** 4\ **Last updated:** [February 6, 2019, 10:40pm UTC](https://forums.synfig.org/t/cant-animate/1466 "2019-02-06T22:40:38Z")
I’ve saved each character in separate SIFZ files. Let’s call them source. Firstly, when you import source into destination SIFZ you can neither edit nor animate it unless it unless source is open alongside destination. … --- ## [Python error on plugin load: Add Skeleton (Simple)](https://forums.synfig.org/t/python-error-on-plugin-load-add-skeleton-simple/4354)
**Author:** [@mikelary](https://forums.synfig.org/u/mikelary)\ **Replies:** 5\ **Last updated:** [January 22, 2019, 9:41pm UTC](https://forums.synfig.org/t/python-error-on-plugin-load-add-skeleton-simple/4354 "2019-01-22T21:41:38Z")
I’m getting the following error immediately after loading the Add Skeleton (Simple) plugin. Could not find platform independent libraries Could not find platform dependent libraries \ Consider setting $PY… --- ## [An issue for a problem in Linux](https://forums.synfig.org/t/an-issue-for-a-problem-in-linux/9214)
**Author:** [@Leyoyel](https://forums.synfig.org/u/Leyoyel)\ **Replies:** 1\ **Last updated:** [December 17, 2018, 10:59pm UTC](https://forums.synfig.org/t/an-issue-for-a-problem-in-linux/9214 "2018-12-17T22:59:17Z")
Hi all, I had a problem with my KXStudio a kubuntu 14.04 LTS. When I try to make start the appimage in a xterm it said that it didn’t found Gomp4.0. The trick is that and it’s work for me, it’s seem to be a packaging … --- ## [Autosave doesn't](https://forums.synfig.org/t/autosave-doesnt/9046)
**Author:** [@msundman](https://forums.synfig.org/u/msundman)\ **Replies:** 9\ **Last updated:** [October 21, 2018, 2:54am UTC](https://forums.synfig.org/t/autosave-doesnt/9046 "2018-10-21T02:54:02Z")
My synfig crashes quite often, so it would be great if autosave would work so I wouldn’t lose so much work. But it doesn’t, and ~/.synfig/autorecovery is always empty. --- ## [Synfig-import-labels template problem](https://forums.synfig.org/t/synfig-import-labels-template-problem/8785)
**Author:** [@mzempel](https://forums.synfig.org/u/mzempel)\ **Replies:** 1\ **Last updated:** [August 30, 2018, 2:29pm UTC](https://forums.synfig.org/t/synfig-import-labels-template-problem/8785 "2018-08-30T14:29:11Z")
When loading labels.txt- “Could not load template descending-text…” How do I "…verify your ‘TEMPLATE\_DIR’ in settings.py " The following “labels.text” loads successfully: start stop text template 0.500 1.50 f… --- ## [Synfig\\bin\\libgdk-3-0.dll 0xc0000005 v1.2.1 & v1.3.10](https://forums.synfig.org/t/synfig-bin-libgdk-3-0-dll-0xc0000005-v1-2-1-v1-3-10/8769)
**Author:** [@LinuxLass](https://forums.synfig.org/u/LinuxLass)\ **Replies:** 2\ **Last updated:** [August 23, 2018, 10:03pm UTC](https://forums.synfig.org/t/synfig-bin-libgdk-3-0-dll-0xc0000005-v1-2-1-v1-3-10/8769 "2018-08-23T22:03:33Z")
Hi Hi I’m getting an frequent but not consistent crash when I reorganise layers with drag and drop. Event viewer suggests its Synfig\\bin\\libgdk-3-0.dll Possible video driver problem (on two systems here)? Drivers sho… --- ## [brush - cannot save (1.2.0)](https://forums.synfig.org/t/brush-cannot-save-1-2-0/4458)
**Author:** [@synme](https://forums.synfig.org/u/synme)\ **Replies:** 0\ **Last updated:** [July 14, 2018, 1:36pm UTC](https://forums.synfig.org/t/brush-cannot-save-1-2-0/4458 "2018-07-14T13:36:58Z")
Hello, the tool: “brush”, makes a mistake: “impossible to record” to get rid of this error, you must delete the brush layer in the right panel, save under another name, and restart the software. It’s an installation ma… --- ## [Plugin Error and Crash](https://forums.synfig.org/t/plugin-error-and-crash/4394)
**Author:** [@Gyromancer](https://forums.synfig.org/u/Gyromancer)\ **Replies:** 1\ **Last updated:** [May 8, 2018, 12:09pm UTC](https://forums.synfig.org/t/plugin-error-and-crash/4394 "2018-05-08T12:09:47Z")
Synfig version & platform: Synfig Version: 1.3.6 (Development Snapshot) Platform: Windows 10 Pro, 64bit Issue description: Whenever I try to use the plug-ins (like “add Skeleton (Simple)”), I receive these strange er… [Previous page](https://forums.synfig.org/c/development/debugging/26.md) [Next page](https://forums.synfig.org/c/development/debugging/26.md?page=2)